Hi all,
I am writing an imaging application that needs to use the PCIe 6351 (DAQmx) to trigger PCIe 1427 which is an IMAQ board. I have browsed through the DAQmx and there is a way to route a PFI line to the RTSI. And there is a RTSI port on the PCIe 1427 as well. However, I have read that PCIe 1427 supports only external trigger. My question is how can I route one of the external trigger of PCIe1427 to the RTSI port?
A further question would be, since I am sending a specific analog waveform out of the PCIe 6351, I want to have a digital pulse from the PCIe6251 at a specific point of the waveform sent via the RTSI to trigger the PCIe 1427, should I write a separate array to the PFI line routed to the RTSI?
Thank you very much!
- Kyle
